TEXPRINT PV

FILTRATION TEST

% Insoluble Residual Matter: 0.2 Max (53 Micron / 300 Mesh)
% Paste: 8.0
Viscosity (cps) @ 25OC, Brookfield Viscometer Model RVT, Spindle 6, RPM 20
After 4 hrs: 32000 - 36000 cps
pH of the paste: 9.0 - 10.0

PROPERTY HIGHLIGHTS OF TEXPRINT PV

Rapid development of viscosity
Stable viscosity
Sharp and Level printing
Very good colour yield
Good washing off

PREPARATION OF STOCK PASTE 
The required quantity of TEXPRINT PV ( 8 kgs ) is gradually added to medium cold water ( 92 kgs ) at room temp
(30Oc) under high speed stirring. After complete addition, continue stirring for 30 minutes. Leave the paste for minimum
4 hrs or overnight. To accelerate swelling property of the gum thickener, hot water can be used. Adjust pH of the paste to
about 5.0 to 5.5 by organic acids viz. citric or tartaric acids etc. then filter the paste using nylon or polyester mono
Filament 160 mesh filter cloth and use it for preparing Print Paste.

PACKING : Packed in Export Worthy 25 kgs. H.D.P.E Laminated Paper Bag with Inner Liner
STORING : Stored under cool climatic conditions